REEL, SHIMANO CURADO 301 K CASTING (2020)

This product is currently out of stock and unavailable.

Whatsapp

FEATURES:

  • 5 ball bearings + 1 roller bearing
  • Shimano Variable Brake System (VBS)

The Shimano Variable Brake System (VBS) uses weights located on the palming side of the reel. The casting characteristics of the reel are easily modified by switching all or combinations of the six brake weights “on” or “off”.

To access the brake weights on your reel see the instructions under “spool access” in this manual.

To turn a weight “on” simply push it out (toward the outer spool edge) past the inner retaining clips. To turn a weight “off” push the weight inward past the clips. Weights can be removed by pushing them out past the last retaining cap.

  • X SHIP gearing system

X-Ship improved gear durability. By supporting the pinion gear on both ends with bearings, the pinion gear maintains precise alignment with the drive gear. This means the gears will stay in the same position under the heaviest loads. The added benefit is that friction between the spool shaft and gear are eliminated. This will enhance the casting performance of the reel with lighter lures, and allow for longer casts.

  • HAGANE body construction

Rigid metal body assures a trouble free fight with fish. The tough metal housing protects the interior of the reel from the most severe external environments.

  • Shimano Super Free System
  • Super Stopper anti-reverse

Super Stopper anti-reverse uses a one-way stainless steel roller bearing to eliminate backplay. It helps you drive the hook home. The quicker you can take up line, the less likely a fish will be able to expel your hook.

  • QuickFire II clutch bar casting system

The QuickFire II thumb bar gives you the ability to control both the spool and the clutch with your thumb alone. The natural hand position puts your thumb right on the QuickFire II clutch bar. Press the bar to disengage the spool for unparalleled casting, then turn the crank to reengage gearing.

  • Precision aluminum S3D Spool

The Shimano Stable Spool Design (S3D) technology features a balanced and uniform thin wall aluminum construction throughout the spool. This precision design significantly reduces spool vibration and creates an incredibly smooth feeling when casting and retrieving the lure.

  • PV Power Handle Grips
OFT Pancing Sdn Bhd is the authorised distributor for Shimano products in Malaysia and hereinafter referred as Shimano. Shimano warrants to the original purchase that this rod/reel will be free from non-conformities in materials and workmanship for a period of one (1) year for reels and two (2) years for rods. This warranty is effective from the date of purchase to the original purchaser only.

Rods and Reels Limited Warranty

During this period, Shimano will perform non breakage/repairs or effective replacement of rods/reels at Shimano’s option, with no cost to the original purchaser other than the cost of shipping charges incurred to our service facility. It also does not cover claims arising from wear and tear, improper use or neglect.

For breakage repairs of rods, a nominal replacement cost will be charged based on the following rod types:

  • Single Piece Rod: 40% of the complete rod SRP
  • Multi Piece Rod: 25% of the complete rod SRP for single section breakage, 40% of the complete rod SRP for two or more section breakages

Warranty Terms & Conditions

  • This warranty will be considered VOID if the rod or reel has been subjected to unauthorized alterations, abuse or damaged by your failure to provide necessary and reasonable maintenance.
  • Only rods/reels purchased from Shimano Authorized Outlets bearing the original warranty sticker are qualified for the warranty program. The usual service parts and repair costs applies to all other rods/reels that are purchased through other sources.
  • In the event that the rod/reel to be repaired has been discontinued, Shimano reserves the right to replace the discontinued rod with a newer model that has equivalent specifications/cost to the customer.
  • Further and in addition, the whole of this warranty shall not in any way whatsoever and howsoever apply to the following models/items:
      • Reel: FX, AX, Hyperloop, IX, Alivio
      • Rod: FXS, Scabard, Cruzar, Spinjoy TE, Stimula
  • Customer are reminded to remove all lines from reels when sending in reels (if applicable) for any service. Shimano will not be held responsible for any damages or loss for any lines.
  • Shimano will contact customer if there is any warranty/ repair doubts to be clarified or for repair quote purposes only.

Claim/Repair Procedure

To request warranty repairs or non-warranty service, please send your rod or reel to any Shimano Authorized Outlets.

Retailers for our products are not required or authorized to perform warranty repairs or exchanges on behalf of Shimano, nor are they authorized to modify this warranty in any way.

Shimano reserves the right to void this warranty if the reels/rods have been tampered, modified or subjected to repairs not authorized by Shimano.

In the case of warranty repair requests, (within the warranty period), the original copy of dated sales receipt and the original copy of Shimano Warranty Card must accompany any warranty claim. If your Shimano rod/reel should be found to require repairs outside of this warranty coverage (beyond warranty period), Shimano or Shimano Authorized Outlets will perform the repair and send a claim for parts, labour and shipping charges (if applicable).

Claim Submission Checklist

Please ensure that the following items are present when submitting your rod/reel for a warranty claim.

  • Valid warranty sticker on rod/reel
  • Dated sales receipt
  • Customer copy of warranty card completed and filled with owner/product/purchase information
  • Completed and filled Shimano copy of Warranty Card to be submitted within 14 days of purchase
  • Complete product for the claim

Shimano reserves the right to reject or void the warranty should any of the above items/requirements not be met. Please note that any tampering or false declarations made in the card will deem the warranty void with immediate effect.

SHIMANO CURADO 301 K CASTING REEL (2020) MODEL 301HG-K
GEAR RATIO 6.6:1
BEARING 5+1
WEIGHT (g) HANDLE POSITION 305 LEFT
MAX DRAG RETRIEVE PER CRANK 8kg/18lb 88cm/35inch
LINE CAPACITY Nylon Mono(lb.-yds.) 12-230 / 14-180 /17-150
PowerPro(lb.-yds.) 40-195, 50-190, 65-125
SHIMANO CURADO 301 K CASTING REEL (2020) MODEL 301K
GEAR RATIO 4.7:1
BEARING 5+1
WEIGHT (g) HANDLE POSITION 300 LEFT
MAX DRAG RETRIEVE PER CRANK 10kg/22lb 63cm/25inch
LINE CAPACITY Nylon Mono(lb.-yds.) 12-230 / 14-180 /17-150
PowerPro(lb.-yds.) 40-195, 50-190, 65-125
 

Additional information

Weight 1000 g
MODEL

301

Reviews

There are no reviews yet.

Be the first to review “REEL, SHIMANO CURADO 301 K CASTING (2020)”

Notify me when the item is back in stock.